USA phone:  760-737-7407 or 1-866-360-3607   fax: 760-737-6718 Australia  phone: + 61 8 8395 0277    fax: + 61 8 8395 1761       SP10 Critically Hard Reinforced Concrete Designed for cutting critically hard reinforced concrete with quartz / river aggregate Wet or wet/dry use SP30 Hard Reinforced Concrete Designed for cutting hard reinforced concrete with hard non-abrasive aggregate Wet or wet/dry use SP50 Medium-Hard Reinforced Concrete Designed for cutting hard reinforced concrete with medium hardness aggregate Wet or wet/dry use SP90 Reinforced Concrete and some Asphalt Designed for cutting reinforced concrete and some asphalt ideal for 70% Concrete & 30% Asphalt Wet or wet/dry use SP110 Green Concrete Designed for cutting green concrete Wet or wet/dry use SP140 Asphalt Designed for asphalt Wet or wet/dry use   Available Segment Heights Segment Height SP10 SP30 SP50 SP90 SP110 SP140 12mm .480" 10mm .400" 9mm .360" 8mm .320" 7mm .280"   Available Configurations Tungsten Insert Diamond Insert Diamond Slug Available Sizes *All blades available in silent or standard core 12" x .120 - 305 x 3.0 16" x .125 - 405 x 3.2 26" x .155 - 660 x 4.0 12" x .125 - 305 x 3.2 16" x .140 - 405 x 3.6 26" x .187 - 660 x 4.8 12" x .140 - 305 x 3.6 18" x .125 - 456 x 3.2 30" x .140 - 760 x 3.6 12" x .187 - 305 x 4.8 18" x .140 - 456 x 3.6 30" x .155 - 760 x 4.0 12" x .250 - 305 x 6.4 18" x .155 - 456 x 3.9 30" x .175 - 760 x 4.4 12" x .375 - 305 x 9.5 18" x .187 - 456 x 4.8 30" x .187 - 760 x 4.8 14" x .120 - 355 x 3.0 18" x .250 - 456 x 6.4 36" x .140 - 915 x 3.6 14" x .125 - 355 x 3.2 20" x .125 - 510 x 3.2 36" x .155 - 915 x 4.0 14" x .140 - 355 x 3.6 20" x .140 - 510 x 3.6 36" x .187 - 915 x 4.8 14" x .187 - 355 x 4.8 24" x .140 - 610 x 3.6 36" x .250 - 915 x 6.4 14" x .250 - 355 x 6.4 24" x .155 - 610 x 4.0 48" x .187 - 1220 x 4.8 14" x .375 - 355 x 9.5 24" x .187 - 610 x 4.8 48" x .210 - 1220 x 5.3 16" x .120 - 405 x 3.0 26" x .140 - 660 x 3.6         Syntec Diamond Tools provides the right blade for the job everytime.