USA phone:  760-737-7407 or 1-866-360-3607   fax: 760-737-6718 Australia  phone: + 61 8 8395 0277    fax: + 61 8 8395 1761       R10 Very High Alumina 90% + Designed for cutting extremely hard non abrasive materials Recommended for Wet use only R30 High Alumina 70 - 90% Designed for cutting hard non abrasive materials with an Alumina content of between 70% and 90% Available in Wet & Wet/Dry Cutting R50 General Purpose Medium Alumina 30-70% Designed for cutting general purpose materials with an alumina content of between 30% and 70% Available in Wet & Wet/Dry Cutting R90 Carbon Block Designed for cutting Carbon Block Available in Wet & Wet/Dry Cutting R100 Silicon Carbide Designed for cutting extremely hard and abrasive material Silicon Carbide Recommended for Wet use only   Available Segment Heights Segment Height R10 R30 R50 R90 R100 12mm .480" 10mm .400" 9mm .360" 8mm .320" 7mm .280"   Available Configurations Laminated Silent Available Sizes *All blades available in silent or standard core 12" x .120 - 305 x 3.0 14" x .125 - 355 x 3.2 20" x .140 - 510 x 3.6 12" x .125 - 305 x 3.2 16" x .120 - 405 x 3.0 24" x .140 - 610 x 3.6 12" x .140 - 305 x 3.6 16" x .125 - 405 x 3.2 24" x .155 - 610 x 4.0 14" x .120 - 355 x 3.0 20" x .125 - 510 x 3.2         Syntec Diamond Tools provides the right blade for the job everytime.