USA phone:  760-737-7407 or 1-866-360-3607   fax: 760-737-6718 Australia  phone: + 61 8 8395 0277    fax: + 61 8 8395 1761       PHS10 Critically Hard Reinforced Concrete For cutting critically hard material including: precast panels, heavily reinforced concrete, concrete pipes Wet use Only PHS30 Medium - Hard Reinforced Concrete For cutting hard non-abrasives material including: reinforced concrete, hard clay brick, terrazzo Wet use Only PSH50 General Purpose Concrete / Masonry For general purpose cutting of cured concrete, brick, masonry & stone Wet use only PHS90 Abrasive Block / Asphalt For cutting abrasive materials including: aslphalt, green concrete, block & sandstone West use only   Available Segment Heights Segment Height PHS10 PHS30 PSH50 PHS90 12mm .480" 10mm .400" 9mm .360" 8mm .320" 7mm .280"   Available Configurations Normal Split Segment U Gullet Available Sizes *All blades available in silent or standard core 12" x .110 - 305 x 2.8 14" x .125 - 355 x 3.2 18" x .125 - 456 x 3.2 12" x .120 - 305 x 3.0 14" x .140 - 355 x 3.6 18" x .140 - 456 x 3.6 12" x .125 - 305 x 3.2 16" x .110 - 405 x 2.8 18" x .155 - 456 x 3.9 12" x .140 - 305 x 3.6 16" x .120 - 405 x 3.0 20" x .125 - 510 x 3.2 14" x .110 - 355 x 2.8 16" x .125 - 405 x 3.2 20" x .140 - 510 x 3.6 14" x .120 - 355 x 3.0 16" x .140 - 405 x 3.6 20" x .155 - 510 x 4.0       Syntec Diamond Tools provides the right blade for the job everytime.