USA phone:  760-737-7407 or 1-866-360-3607   fax: 760-737-6718 Australia  phone: + 61 8 8395 0277    fax: + 61 8 8395 1761       P10 Critically Hard Reinforced Concrete Designed for cutting critically hard reinforced concrete with quartz / river aggregate Wet use only P30 Hard Reinforced Concrete Designed for cutting reinforced concrete with hard non abrasive aggregate Wet use only P50 Medium - Hard Reinforced Concrete Designed for cutting hard reinforced concrete with medium hardness aggregate Wet use only P90 Abrasive Reinforced Concrete Designed for cutting reinforced concrete with abrasive aggregate Wet Use Only P110 Green Concrete Designed for cutting green concrete Wet use only P140 Asphalt Designed for cutting Asphalt Wet use only   Available Segment Heights Segment Height P10 P30 P50 P90 P110 P140 12mm .480" 10mm .400" 9mm .360" 8mm .320" 7mm .280"   Available Configurations Tungsten Insert Diamond Insert Diamond Slug Available Sizes *All blades available in silent or standard core 12" x .120 - 305 x 3.0 16" x .125 - 405 x 3.2 26" x .155 - 660 x 4.0 12" x .125 - 305 x 3.2 16" x .140 - 405 x 3.6 26" x .187 - 660 x 4.8 12" x .140 - 305 x 3.6 18" x .125 - 456 x 3.2 30" x .140 - 760 x 3.6 12" x .187 - 305 x 4.8 18" x .140 - 456 x 3.6 30" x .155 - 760 x 4.0 12" x .250 - 305 x 6.4 18" x .155 - 456 x 3.9 30" x .175 - 760 x 4.4 12" x .375 - 305 x 9.5 18" x .187 - 456 x 4.8 30" x .187 - 760 x 4.8 14" x .120 - 355 x 3.0 18" x .250 - 456 x 6.4 36" x .140 - 915 x 3.6 14" x .125 - 355 x 3.2 20" x .125 - 510 x 3.2 36" x .155 - 915 x 4.0 14" x .140 - 355 x 3.6 20" x .140 - 510 x 3.6 36" x .187 - 915 x 4.8 14" x .187 - 355 x 4.8 24" x .140 - 610 x 3.6 36" x .250 - 915 x 6.4 14" x .250 - 355 x 6.4 24" x .155 - 610 x 4.0 48" x .187 - 1220 x 4.8 14" x .375 - 355 x 9.5 24" x .187 - 610 x 4.8 48" x .210 - 1220 x 5.3 16" x .120 - 405 x 3.0 26" x .140 - 660 x 3.6         Syntec Diamond Tools provides the right blade for the job everytime.